8-3 FL11.0ATR
P-ON+3.3V is not output.
FLOW CHART NO.10
Is approximately +6.5V voltage supplied to Pin(1) of
IC631?
Is approximately +5.6V supplied to Pin(2) of IC631?
No
Ye s
Ye s
Check C639, D639 and their periphery circuit, and
service it if defective.
Check Q638, Q639, P-ON-H2 line and their per
iphery
circuit, and service it if defective.
No
Replace IC631.
Check C636, D
636 and their periphery circuit, and
service it if defective.
Check Q202, Q203, D204, P-ON-H1 line and their
periphery circuit, and service it if def
ective.
Replace Q206.
Is approximately -11V voltage supplied to the
base of Q206?
Ye s
No
No
PANEL-7.1V is not output.
FLOW CHART NO.11
Is approximately -12V voltage supplied to the
anode of D636?
Ye s
Check if there is any leak or short-circuit on
the loaded circuit, and service it if defective.
AL+5V is not output.
FLOW CHART NO.9
Is approximately +6.5V voltage supplied to the
cathode of D639?
Ye s
Check C639, D639, D655, D657 and their periphery
circuit, and service it if defective.
No
Comments to this Manuals