Magnavox MAS-300 User Manual download pdf (Page 31)

No Power

• Check the TV power cord Unplug the TV,

wait 10 seconds, then reinsert the plug into

the outlet and push the POWER button

again.

• Check that the outlet is not on a wall

switch.

• Be sure the fuse is not blown on the AC

power strip, if one is being used

No Picture

• Check antenna connections. Are they

properly secured to the TV's ANT 75_2

plug_

• Check the TUNER MODE control for the

correct tuner setting

•Try running the Auto Program feature to

find all available channels

• Press the CH+ or CH buttons on the

remote to make sure the correct signal

source is selected (FRONT or Current

Channel).

No Sound

• Check the VOLUME buttons

• Check the MUTE button on the remote

control

• If you're attempting to hook up auxiliary

equipment, check the audio jack connec-

tions located on the front of the TV

Remote Does Not Work

• Check the batteries. If necessary, replace

them with 2 AA Heavy Duty (Zinc

Chloride) or Alkaline batteries.

• Clean the remote control and the remote

control sensor window on the TV.

• Check the TV power cord. Unplug the

TV, wait l0 seconds, then reinsert the

plug into the outlet and push the POWER

button again.

• Be sure the fuse is not blown on the AC

power strip, if one is being used.

• Check to be sure the TV outlet is not on

a wall switch.

TV Displays Wrong Channel or No

Channels Above 13

• Repeat channel selection.

• Add the desired channel numbers (using

the CHANNEL EDIT control) into the

TV's memory.

• Check to be sure the TUNER NODES are

set to the CABLE option and run the Auto

Program feature to find all available chan-

nels.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments