Magnavox MAS-80 User Manual download pdf (Page 13)

13

English

8240 009 34231

Basic Functions

IMPORTANT!

Before you operate the system, complete

the preparation procedures.

Plug and Play

Plug and Play allows you to store all available

radio stations automatically.

First time setup/power up

1 When you turn on the main power, "AUTO

INSTALL - PRESS PLAY" is displayed.

2 PressÉÅ on the system to start installation.

➜ "INSTALL" is displayed, followed by "TUNER"

and "AUTO".

➜ PROG starts flashing.

➜ All available radio stations with sufficient signal

strength will be stored automatically, starting

from FM and followed by AM band.

➜ When all the available radio stations are

stored or the memory for 40 presets is used, the

last preset radio station will be played.

To reinstall Plug and Play

1 In Standby or Demonstration mode, press and

holdÉÅ on the system until "AUTO INSTALL

- PRESS PLAY" is displayed.

2 PressÉÅ again to start installation.

➜ All previously stored radio stations will be

replaced.

To exit without storing the Plug and Play

● Press Çon the system.

➜ If you do not complete the Plug and Play

installation, the function will be restarted when

you next turn on the main power again.

Notes:

– When the power is turned on, the disc tray may

open and close to initialize the system.

– If no stereo frequency is detected during

Plug and Play, "CHECK ANTENNA" will be

displayed.

– During Plug and Play, if no button is pressed

within 15 seconds, the system will exit Plug and

Play mode.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 25 26

Comments to this Manuals

No comments