Magnavox P-14PE Owner's Manual download pdf (Page 14)

INSTALLATION INSTRUCTIONS

Exhaust hose installation:

The exhaust hose and adaptor must be attached or removed

in accordance with the usage mode.

The duct can be compressed or extended moderately

according to the installation requirement, but it is

desirable to keep the duct length to a minimum.

1. Install the window Exhaust adaptor B onto the exhaust

hose as shown in Fig.18. Refer to the previous

pages for window kit installation.

2. Place the Exhaust hose over against the air outlet opening

hook(See Fig.19) and flat the other end(See Fig.20) for

quick installation.

IMPORTANT:

DO NOT OVER BEND THE DUCT (SEE Fig.21)

Fig.18

Fig.21

Note:

Cover the hole using the adaptor cap when not in use.

COOL,HEAT(heat pump type

)

or AUTO

mode

FAN, DEHUMIDIFY or

HEAT(electrical heat type)

mode

Attach

Remove

CAUTION:

Make sure that there is no obstacle around the air outlet of

the exhaust hose (in the range of 1.6 ft.) in order to the

exhaust system works properly.

Fig.20

Push in

Hook

Fig.19

1 2 ... 9 10 11 12 13 14 15 16 17 18

No comments

Magnavox P-14PE Owner's Manual Page 14