Magnavox MTV-51 Operations Instructions download pdf (Page 44)

RQT7301

Reference

Troubleshooting guide

Sound Page

Operation

Recording and timer recording

No sound.

Low volume.

Distorted sound.

Cannot hear the desired

audio type.

≥Check the connections and settings. Check the input mode on the amplifier if you have

connected one.

≥Press [AUDIO] to select the audio.

≥Turn off V.S.S. in the following cases.

–When using discs that do not have surround sound effects such as Karaoke discs.

–When playing MTS broadcast programs.

≥The disc may have a restriction on the method of audio output. If “D.MIX” does not appear in

the display when playing multi-channel DVD-Audio, only audio for the two front channels will

be output. Refer to the disc’s jacket.

7–9, 37

17, 24

—

Cannot switch audio. ≥You cannot change the audio type when a DVD-R is in the disc tray.

≥You cannot change the audio type when playing a DVD-R. (You can select “Main” or “SAP”

in “Select MTS” in the SETUP menu before recording.)

≥You have used digital connection. Set “Dolby Digital” to “PCM” or connect using audio

cables (analog connection).

≥There are discs which audio cannot be changed because of how the disc was created.

—

37, 9

—

Cannot operate the

television.

The remote control doesn’t

work.

≥Change manufacturer code. Some televisions cannot be operated even if you change the

code.

≥The remote control and main unit are using different codes. Change the code on the remote

control.

Press and hold [ENTER] and the indicated number button

at the same time for more than 2 seconds.

≥The batteries are depleted. Replace them with new ones.

≥Colored glass may obstruct the signal reception/transmission.

≥Don’t place the signal sensor in direct sunlight or in areas that may be subject to sunlight

exposure.

—

The unit is on but cannot be

operated.

≥Some operations may be prohibited by the disc.

≥The unit is hot (“U14” appears on the display). Wait for “U14” to disappear.

≥One of the unit’s safety devices may have been activated.

Reset the unit as follows:

Press [POWER Í/I] on the main unit to switch the unit to standby.

If the unit doesn’t switch to standby, press and hold [POWER Í/I] on the main unit for about

10 seconds. The unit is forcibly switched to standby.

Alternatively, disconnect the AC power supply cord, wait one minute, then reconnect it.

—

Cannot eject disc. ≥The unit may have a problem. While the unit is off, press and hold [∫] and [CH W] on the

main unit at the same time for about 5 seconds. Remove the disc and consult the dealer.

—

Cannot record. ≥You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc the

unit can record onto.

≥The disc is unformatted. Format the disc. [RAM]

≥The write-protect tab on the cartridge is set to PROTECT, or the disc is protected with DISC

SETTING.

≥Some programs have limitations on the number of times they can be recorded (CPRM).

≥The disc is full or nearly full. Erase unneeded titles or use another disc.

≥You cannot record on finalized DVD-R discs.

≥Due to peculiarities of DVD-R, you may be unable to record onto them if you either insert

and remove the disc or switch the unit on and off while a disc is loaded, a total of fifty times.

≥A DVD-R recorded on this unit may not be recordable on other Panasonic DVD recorders.

15, 33

24, 29, 33

—

Timer recording does not

work properly.

VCR Plusr system does

not work properly.

≥When connecting a cable TV box or satellite receiver, the VCR Plusi system does not

work.

≥The timer program is incorrect or different timer program times overlap. Correct the

program.

≥The unit is not on timer recording standby. (“F” on the unit’s display is not on.) Press

[Í DVD POWER] to turn the unit off and make sure that “F” is on.

≥Correct the guide channels.

≥Set the clock.

—

19, 20

Timer recording does not

stop even when [∫] is

pressed.

≥Press [∫] and then [ENTER] within 5 seconds to turn “F” off. Recording stops. 19, 20

The timer program remains

even after recording

finishes.

≥The timer program remains if set to daily or weekly. 20

A part or whole of a

recorded title has been lost.

≥If there is a power failure or the plug is disconnected from the household AC outlet while

recording or editing, the title may be lost or the disc may become unusable.

You will have to format the disc ([RAM]) or use a new disc. We cannot offer any guarantee

regarding lost programs or discs.

7301en.book 44 ページ２００４年３月１日　月曜日　午後５時３５分

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 50 51 52

Comments to this Manuals

No comments

Magnavox MTV-51 Operations Instructions Page 44

Comments to this Manuals

Related products and manuals for DVD players Magnavox MTV-51